石墨化热处理过程中石墨制品的微观结构分析和理化性能表征
石墨化热处理过程中石墨制品的微观结构分析和理化性能表征
作者:
基金项目:
国家自然科学基金资助项目( 51204084，51374118)；云南省应用基础研究计划（2011FZ302）
Characterization of organization structure and physicochemical properties for Graphitization products in the process ofGraphitization heat treatment
Author:
摘要 | | 访问统计 | | | |摘要:
以经混捏+轧片、冷等静压成型以及焙烧等工序处理后的焙烧样品为原料，通过石墨化热处理后，考察焙烧样品经石墨化热处理前后的组织结构和理化性能.试验结果表明，经2 800 ℃热处理，焙烧样品的结构由杂乱无序的结构转化为有序的三维石墨结构，处理后样品的石墨化度达到62.79%.室温电阻率随石墨化度的增大而下降，随体积密度的增大而下降.同时相比石墨化处理前，抗折强度和抗压强度降低了50%以上.
Abstract:
The graphitization heat treatment of the calcined samples as the raw material was studied, and these samples were obtained by the process treatment of roasting kneading, shaping and baking. The organization structure and physicochemical properties of these samples before and after graphitization heat treatment were investigated. The results showed that: after the treatment of 2800 ℃, the organizational structure of samples conversion of orderly three-dimensional structure from disordered two-dimensional, and these samples have the characterization of graphite structure, and the graphitization degree reached 62.79%. Room-temperature resistivity increases with the graphitization degree decreases, along with the increase of bulk density decreased, the flexural strength and compressive strength decreased significantly, reduced by 50%.
引用本文于站良,施辉献,和晓才,谢刚,钟琦.石墨化热处理过程中石墨制品的微观结构分析和理化性能表征[J].湖南科技大学学报（自然科学版）,2014,29(4):93-97
复制
文章指标 点击次数:2941 下载次数: 7899 历史 在线发布日期: 2014-12-23相关知识
膨胀石墨孔隙结构及表征方法研究进展
氧化石墨烯/水泥基复合材料的微观结构和性能
硅藻土微观形貌观.docx
飞秒激光下多层石墨烯损伤研究与微图案化潜力
武汉大学潘春旭课题组Green Chemistry：生物质石墨化多孔碳材料的制备及其储能性能研究
第二章 材料的微观结构
5Cr15MoV马氏体不锈钢的微观结构
如何规范石墨烯行业标准和认证？
Synthesis and capacitive performance of globular MnO2 flowers anchored graphene composites
热处理木材的材性预测与质量控制研究现状与发展
网址: 石墨化热处理过程中石墨制品的微观结构分析和理化性能表征 https://m.huajiangbk.com/newsview2283290.html
| 上一篇: 烧结温度对多孔TiNi合金微观结 |
下一篇: 镍基单晶高温合金瞬态液相连接接头 |
